• Product Features:
  

• Equipped with high-precision infrared sensor, soap can be automatically foamed and dispensed in 0.25s. Less time to get a quick hand washing. 
• Workable with both foam soap and liquid soap. Also work with shampoo, face cleaner, dish detergent. 
• IPX5 waterproof body, with low power consumption and quieter motor.
  
• Adjustable three levels of foam volume to set as you like.
• Fully charged in 3 hours and last for up to 3 months, with built-in rechargeable battery.
• 300ml big liquid capicity, lasting for about one-month usage, avoiding frequent liquid filling.
• Option of wall mounted type to suit your arrangements in bathroom, kitchen, classroom, office

Steps to Use:

1. Charge it for two or three hours
2. Spin off the reservoir
3. Add soap and water (Use foam soap directly or dilute liquid soap with 4 times water, you could get perfect foam)
4. Install the reservoir
5. Long press button to turn on the dispenser
6. Clike button to set foam volume (White light for high volume=1.8g per time, Blue light for medium volume=1.0g per time, Green light for low volume=0.8g per time)

DOs& DON'Ts:

• DO dilute liquid soap with 3 or 4 times water, then you could get perfect foam.
• DO add warm water and pump water out for a few times before each refill. Regular cleaning will help to extend its working life.
  
• DO NOT immerse the dispenser in water or rinse it, or it will short circuit.
  
• DO NOT use hand soap or other soap that contains solid particles.
  
• DO NOT invert the dispenser.
  
• DO NOT block the foam outlet with your hand.
  

TROUBLE SHOOTING:

1. It doesn't foam, I could see indicator light up and hear the working sound, but no foam, what could I do?

----Please check soap outlet and tube, make sure nothing clog them. Then fill the soap reservoir with water and wave hand to get water out. It will test soap passage and also help to clean the passage. If it doesn't work, please contact us.

2. When I move hand to sensor area, the indicator get red and won't foam.

----Please clean the sensor, restart the dispenser and try it again. Contact us if it doesn't work.

3. I press power button but it doesn't turn on! No indicator light up!

----Please charge it for 2 hours before first use when it doesn't turn on. If it still does not work after full charge, please contact us for help.